TerraFirma
EPOXY FLOORING in BEND

Improve the look of garage and covered concrete floors.
Start with concrete preparation for better coating performance.
Bend, Oregon

Epoxy Flooring in Bend for Garages and Covered Concrete Spaces

Epoxy flooring in Bend can upgrade worn, stained or unfinished garage concrete with a professionally prepared multi-layer coating system. Bend garages deal with vehicles, storage, tools, dirt, seasonal moisture and temperature changes, so TerraFirma starts with the condition of the slab before building the finished floor above it.

Epoxy flooring in Bend garage coating by TerraFirma
More Than Floor Paint

Build the Finish as a Complete Concrete System

TerraFirma’s epoxy floor system combines concrete preparation, polyaspartic coating, decorative vinyl chips and a protective finish. Each layer has a different job, which is why proper preparation matters before the finished appearance is created.

Bend Garage Conditions

The Floor Has to Work With the Space Above It

Epoxy flooring in Bend should be selected around the slab condition, exposure and how the garage or covered area is actually used.

01

Seasonal Moisture

Snow, wet vehicles and outdoor moisture can be carried into a garage and across the concrete floor.

02

Temperature Change

Bend’s seasonal temperature shifts make the condition of the existing concrete an important part of the evaluation.

03

Everyday Use

Vehicle traffic, storage, tools and foot traffic all influence how the floor is used day to day.

04

Existing Slab

Cracks, wear, old coatings and surface contamination can affect the preparation required before installation.

Preparing concrete for epoxy flooring in Bend
Before the Color Goes Down

Epoxy Flooring in Bend Starts With Surface Preparation

The finished coating may get the attention, but adhesion starts with what happens to the concrete first.

TerraFirma evaluates the floor, addresses appropriate chips and cracks, removes material that could interfere with adhesion and mechanically prepares the concrete.

Inspect

Review cracks, surface wear and previous floor treatments.

Repair

Address appropriate imperfections before coating begins.

Grind

Create a prepared concrete surface for the coating system.

Clean

Remove material that could interfere with coating adhesion.

Build the Floor in Layers

From Prepared Concrete to the Finished Coating

TerraFirma’s floor coating is installed as a sequence rather than one heavy layer placed over the concrete.

01

Prepare the Concrete

Create a clean, mechanically prepared surface before the coating system begins.

02

Apply the Basecoat

A rapid-cure polyaspartic basecoat is applied to the prepared concrete.

03

Broadcast Decorative Chips

Vinyl chips are distributed across the tacky basecoat to build the floor’s texture and appearance.

04

Scrape Excess Flakes

Loose excess material is removed to produce a more consistent surface.

05

Apply the Finish

A protective polyaspartic coating seals the installation and creates the finished surface.

Applying coating during epoxy flooring installation
Recommended Spaces

Epoxy Flooring in Bend Works Best in Indoor or Covered Areas

TerraFirma primarily recommends the system for garages, workshops and other indoor or covered concrete areas. Extended direct sunlight can still affect the finish over time.

01

Residential Garages

Upgrade vehicle and storage areas with a cleaner, more finished floor.

02

Home Workshops

Give covered work areas a durable decorative coating over properly prepared concrete.

03

Covered Concrete

Other protected spaces may be appropriate depending on slab condition and exposure.

Finished decorative garage floor coating by TerraFirma
Still Looking at Bare or Worn Concrete?

Turn the Garage Floor Into Part of the Finished Space

A garage does not have to feel unfinished simply because vehicles and storage use the space.

TerraFirma can evaluate the concrete, prepare the slab and install the coating system around the way you use the area.

Evaluate My Garage Floor
Finished Appearance

Decorative Chips Give the Floor Its Character

The finished system has a glossy appearance with texture created by the decorative chip layer.

Decorative Chips

Break Up a Flat Solid Color

Vinyl flakes create visual variation across the floor and help form the recognizable finished appearance.

Surface Texture

Add Dimension to the Finish

The chip broadcast contributes to the texture of the finished coating.

Color Selection

Confirm the Final Look Before Installation

Available color and finish selections should be confirmed with your TerraFirma System Design Specialist.

The TerraFirma Approach

From Concrete Slab to Finished Bend Garage Floor

Epoxy flooring in Bend performs as a system: slab evaluation, preparation, basecoat, decorative chip layer and protective finish.

01 / Evaluate

Inspect the Slab

Review concrete condition, cracks, previous coatings and how the space is used.

02 / Prepare

Create the Right Surface

Repair appropriate defects and mechanically prepare the floor for coating adhesion.

03 / Coat

Build the System

Apply the basecoat and decorative chip layer in sequence.

04 / Finish

Seal the Installation

Apply the final protective coating to complete the floor.

Is Your Bend Garage Floor Ready?

Start With the Concrete Before Choosing the Finish

If your garage floor is stained, cracked, worn or simply unfinished, the first step is understanding the slab underneath.

TerraFirma can evaluate whether epoxy flooring in Bend fits the concrete condition, exposure and intended use of the space.

See If My Floor Is a Fit

TerraFirma
Roseburg Office

7700 Old Hwy 99 N
Roseburg, OR 97470

Hours: Monday – Friday, 8am-5pm

Ready to repair and upgrade your concrete?

Ask about our Epoxy and Vuba Stone concrete finishes!